Before You Begin Before performing a factory restore, be sure to backup or document all important data such as contacts or personal settings. Your phone will lose its provisioning information and registration after a factory restore; this will keep the phone from being able to make and receive calls. Some phones will reach out to a Zero-Touch Provisioning (ZTP) server after being restored. Do not interrupt any phone processes as this can cause damage to the phone’s software/configuration. If your phone doesn’t register after a factory reset, please contact Veracity’s Customer Support team. |
If you have access to your phone’s menu, this is the easiest and recommended option.
You can access your phones settings by pushing the button with an image of a cog/gear on it.
Scroll down and select “Device administration).
Scroll down and select “Factory reset.” You’ll be asked to confirm. Once you confirm the process will begin.
DO NOT Interrupt the Factory Restore Process While the phone is restoring, do not disconnect the phone from its power source, press any buttons (unless prompted), or interrupt the process in any other way. This could cause the phone to fail the factory restore process and/or brick the phone. |
When the restore is complete, the main screen should appear. |
Another easy method for factory restoring your Cisco phone, is to use the Web interface of the device. To do this, you will need a computer on the same network as the phone.
Before you can log into your phone, you’ll need its IP address. You can find this in the Settings and Information menu by pressing the cog/gear icon.
Scroll down and select “Status.” ⓘ
Select “Network status.”
Select “IPv4 status.”
Here you can find your phone’s IP address.
Now that you have the phone’s IP address, open a Web browser (i.e. Chrome, Firefox, or Safari) and type the IP address into your browser’s URL bar. Press enter/return.
You should be brought to the phone’s Web interface. If you need a password, please contact our support team. If you didn’t purchase the phone from Veracity, please contact the seller.
In the top-right corner of the display, select “Admin Login.” You should be brought to the basic section of the Admin page. If you’re not in the basic section, select “Basic” in the top-right corner of the page.
Under the “Info” tab, select the “Debug Info” tab. Under the Factory Reset heading, select “Factory Reset” and click CONFIRM FACTORY RESET to confirm.
DO NOT Interrupt the Factory Restore Process While the phone is restoring, do not disconnect the phone from its power source, press any buttons (unless prompted), or interrupt the process in any other way. This could cause the phone to fail the factory restore process and/or brick the phone. |
When the restore is complete, the main screen should appear. |
If you’re unable to access the phone’s menu—or the first method isn’t working for you—try using the keypad method.
If you’re using POE, unplug the Ethernet/LAN cable from the device. If you’re using a Power Cube (power adapter), disconnect it.
Before reconnecting your phone, wait at least five seconds. Check the next step before connecting your device to a power source.
Press and hold the pound/hash key (#) while plugging the phone back in. When the light on the Mute button turns off, release and dial the following sequence 1 2 3 4 5 6 7 8 9 * 0 #
If done correctly, the factory reset process should begin.
DO NOT Interrupt the Factory Restore Process While the phone is restoring, do not disconnect the phone from its power source, press any buttons (unless prompted), or interrupt the process in any other way. This could cause the phone to fail the factory restore process and/or brick the phone. |
When the restore is complete, the main screen should appear. |
Please reach out to our customer service team at 801-379-3000 or 800-213-1315 for additional assistance.
Thank you!